1322 Washington Avenue, Philadelphia PA 19147

      ​(267) 687-7428



Use natural and gentle cleaners for natural stone countertops.  Warm water and detergents, or cleaners designed for natural stone are recommended for daily cleaning.

You can potentially damage your countertops using cleaners that contain strong chemicals and solvents, or cleaners that are too abrasive or acidic. Strong chemical containing cleaners such as oven cleaners should also be avoided.  These cleaners may cause damage to the finish and remove existing sealers, making the stone more susceptible to stains and bacteria growth in the pores.


Do use Hot pads or Trivets.  Granite & quartzite has extreme heat tolerance however sudden and high changes in temperature may cause damage to the stone.  We generally recommend using pads and trivets for hot pots and pans.

Reseal with a water-based sealer

Most granite and quartzite counters require periodic sealing.  Using a water-based penetrating sealer and sealing your counters every 6 months to one year, depending on the color/type of the stone is highly recommended.

As a rule of thumb the lighter the color, the more porous the stone

Lighter-colored natural stones are usually more porous than darker ones, requiring more maintenance and needing to be re-sealed more often.



Marble is softer and always more porous/fragile than granite. Due to the nature of marble, these counters are more susceptible to scratches, pitting, chips and stains. It is usually more appropriate for low-traffic areas.  Marble has high heat tolerance, but sudden and extreme temperature changes can damage the stone or finish so using pads and trivets for hot pots and pans is recommended.

Marble counters require periodic sealing.  Use a water-based penetrating sealer, and reseal your marble counters every 6 months to one year as a preventative measure.


Limestone is softer and typically more porous than marble. Because of this, limestone counters are more susceptible to scratches, chips, pitting, and stains. It is more appropriate for low-traffic areas.

Use Hot pads or Trivets

Travertine/Limestone can tolerate a lot of heat, but sudden changes in temperature may cause damage to the stone just like any other natural stone so using hot pads or trivets are again recommended.

Travertine/Limestone counters require periodic sealing.  Just like any other natural stone, using a water-based penetrating sealer, and resealing your counters every 3 months to 6 months is recommended.


Quartz/Engineered Stone

Don't polish Engineered Stone/Quartz

Engineered Stone/Quartz counters should not be polished. Polishing may dull or damage the existing finish from the manufacturer and it would be very difficult to restore.

No need for sealing.

Since engineered stone/quartz counters are not porous, no sealing is required as this is the main appeal of going with engineered stone/quartz vs natural stone.

Quartz has a very high heat tolerance, but sudden changes in temperature may even damage these materials.  Using pads and trivets for hot pots and pans can prevent problems.

Countertop Care & Maintenance